K-Tec Wear Parts and Cutting Edges
Filters
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
K-Tec earthmoving scrapers, including the 1228 pull scraper, are built for high-volume dirt moving on road construction, land grading, and large site prep projects. Keeping the right cutting edges and wear components on a K-Tec scraper maintains clean, efficient cuts through a full production day and protects the bowl and blade structure underneath from premature wear.
What Are K-Tec Cutting Edges and Wear Parts
A K-Tec cutting edge is the primary wear surface on the bottom of the scraper bowl that contacts soil, clay, gravel, and rock during cutting passes. It absorbs abrasion and impact so the bowl lip and base steel are protected. On the 1228, this includes center and end cutting edges in Hardox 500 steel, built to a sharp bevel for clean penetration. Supporting wear parts include end bits, side cutters, and wear plates, each guarding a high-impact zone during loading and cutting.
Why Replace K-Tec Wear Parts Regularly
- Prevent structural damage. A worn-through cutting edge exposes the bowl lip to direct ground contact, leading to costly structural repairs that take a scraper out of service.
- Maintain cutting efficiency. Fresh edges penetrate soil cleanly and reduce the push force required, keeping tractor fuel consumption and cycle times in check.
- Lower operating costs. Efficient cutting reduces strain on the push tractor and the scraper drivetrain, extending the life of both machines.
- Enable faster field swaps. Bolt-on cutting edges make swaps straightforward in the field, keeping a K-Tec 1228 on the job rather than in the shop.
- Keep cut depth consistent. Properly maintained edges give operators more consistent control over cut depth and load volume per pass.
Why Choose Equipment Blades for K-Tec Parts
- OEM-compatible fitment. Center and end cutting edges built to match the K-Tec 1228 bowl profile and bolt pattern.
- Hardox 500 steel. Abrasion-resistant options with an extra-sharp bevel for extended wear life in heavy earthmoving conditions.
- Left and right hand coverage. Both LH and RH end and center pieces stocked for the 1228.
- Custom fabrication. Domestic manufacturing with custom hole spacing and thickness when a standard profile doesn't fit.
- Real fitment help. Our team confirms the correct part for your specific K-Tec model before it ships.
Common FAQs About K-Tec Cutting Edges and Wear Parts
How do I confirm a cutting edge fits my K-Tec 1228 scraper
Measure your existing blade's length, hole spacing, thickness, and bevel style, and have your bowl width on hand. Matching those details against the part spec confirms fitment for the 1228.
What is the difference between single bevel and double bevel edges
Single bevel edges cut in one direction and are standard on most scraper applications. Double bevel or reversible blades can be flipped once the first side wears down, extending total service life.
When should I flip a reversible blade
Flip the blade once wear reaches roughly half the usable edge thickness. This maximizes total life and keeps the base steel protected from direct contact.
What bolt grade should I use to mount a cutting edge
Use Grade 8 or an equivalent high-strength plow bolt with a hardened nut. Scraper cutting passes put real load and impact on the mounting hardware.
Do you carry cutting edges for K-Tec pull scrapers and push-pull scrapers
Yes. We stock cutting edges for K-Tec scraper models, including center and end pieces for the 1228. Send us your model number and bowl width to confirm the right fit.
Not sure which parts you need?
Our friendly service reps will be happy to assist. Please download and fill out our blade measurement form and either fax or email it back and we’ll find you the right parts.
Download Form