Boss Snow Plow Cutting Edges and Wear Parts

Boss snow plows are built for serious winter work — straight blades, V-plows, and expandable wings that move heavy snow fast. Keeping the right cutting edges on your Boss plow is what separates a clean, efficient push from a blade that bounces, skips, and wears out the steel underneath.

What are snow plow cutting edges and wear parts

The cutting edge is the bottom wear surface of your Boss plow blade. It contacts pavement, gravel, and packed snow with every pass. Cutting edges absorb abrasion and impact so the base blade steel beneath is protected. Supporting wear parts include trip edge components, wear shoes, and hardware — all of which need regular inspection and replacement to keep your Boss plow performing through a full season.

Why replace Boss plow cutting edges regularly

Prevent blade damage: A worn-through cutting edge exposes the base steel of your Boss moldboard to direct pavement contact, leading to costly structural damage. Cleaner scraping: A fresh edge maintains tight contact with the road surface, leaving less snow and ice behind on every pass. Protect your pavement: Proper edge contact spreads load evenly and reduces gouging on asphalt and concrete surfaces. Faster swaps: Bolt-on Boss cutting edges are designed for quick roadside or shop replacement so your truck stays on route. Consistent trip performance: Worn edges affect trip edge tension and blade response — fresh edges keep the trip system working as designed. Lower per-season cost: Replacing edges on schedule costs far less than repairing or replacing a damaged Boss blade.

Why choose Equipment Blades

• OEM compatible fitment for Boss straight blades, V-plows, and expandable wing plows
• Rubber and steel cutting edge options to match your application and surface type
• Inventory coverage across Boss plow models and blade widths
• Standard and custom hole spacing available when needed
• Responsive support to confirm the right edge for your specific Boss plow model

Common FAQs about Boss plow cutting edges

How do I confirm compatibility? Check your Boss plow model (straight, V, or expandable), blade width, and existing edge thickness. Boss cutting edges use specific hole patterns — measure center-to-center bolt spacing before ordering.

Steel edge vs rubber edge — which should I use? Steel edges are more aggressive and work well on gravel roads and heavy wet snow. Rubber edges are better for sensitive surfaces like pavers or brick and reduce trip-edge impact.

How do I know when to replace my Boss cutting edge? Replace when edge thickness wears to roughly 1/4 inch or less, or when you notice increased blade bounce and incomplete scraping on passes.

What hardware should I use? Boss cutting edges use plow bolts with hex nuts or flange nuts depending on the model. Use Grade 5 or Grade 8 hardware and check torque after the first few plowing hours.

Do you carry edges for Boss V-plows specifically? Yes. Boss V-plow cutting edges — including the 9'2" and 10' configurations — are stocked. Contact us with your model and blade width for confirmation.