Dressta/Dresser/International/Hough Wear Parts and Cutting Edges
Filters
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Part #:
Dressta, Dresser, International, and Hough share a common lineage in heavy dozing, grading, and loading work, and parts built under one name often carry over to machines sold under the others. TD-series crawler dozers (TD8 through TD40), 500-series wheel loaders (510 through 555), and motor graders built under these brands all depend on a properly fitted cutting edge to protect the structural steel underneath and stay productive in the field.
What Are Dressta, Dresser, International, and Hough Cutting Edges and Wear Parts
A cutting edge is the primary wear surface on a dozer blade, grader moldboard, or loader bucket that contacts soil, gravel, asphalt, or rock during dozing, grading, and loading. It absorbs abrasion and impact so the blade base and bucket lip underneath stay protected. Supporting wear parts include end bits, corner guards, adapters, and side plates, each guarding the highest-impact areas on TD-series dozer blades and 500-series loader buckets.
Why Replace These Wear Parts Regularly
- Prevent structural damage. A worn-through cutting edge exposes the moldboard or bucket lip to direct contact, leading to costly structural repairs that take equipment out of service.
- Keep cuts clean. A fresh edge improves blade penetration and reduces the bounce and chatter that slow grading and dozing cycles.
- Lower operating costs. Efficient blade penetration reduces machine strain, shortens cycle times, and cuts fuel consumption across a full shift.
- Enable faster field swaps. Bolt-on cutting edges keep replacement quick and straightforward, so equipment stays in the field instead of the shop.
- Extend total service life. Rotating or flipping reversible edges spreads wear evenly across both sides of the blade.
Why Choose Equipment Blades for These Parts
- OEM-compatible fitment. Cutting edges built to match Dressta, Dresser, International, and Hough dozer, grader, and loader specs.
- Legacy and current coverage. Inventory spanning TD-series dozers and 500-series loaders, from older International and Hough models through current Dressta production.
- Abrasion-resistant steel. Options built for extended wear life in heavy-duty applications.
- Custom fabrication. Domestic manufacturing with custom hole spacing and thickness when a standard profile doesn't fit.
- Real fitment help. Our team confirms model number and blade dimensions before your part ships.
Common FAQs About Dressta, Dresser, International, and Hough Cutting Edges
How do I confirm a cutting edge fits my TD-series dozer or 500-series loader
Measure your existing blade's length, hole spacing, thickness, and bevel style, and have your model number and blade type on hand. Matching those details against the part spec confirms fitment across Dressta, Dresser, International, and Hough equipment.
What is the difference between single bevel and double bevel edges
Single bevel edges cut in one direction and are standard on most dozer and grader applications. Double bevel or reversible blades can be flipped once the first side wears down, extending total service life.
When should I flip a reversible blade
Flip the blade once wear reaches roughly half the usable edge thickness. This maximizes total life and keeps the base steel protected from direct contact.
What bolt grade should I use to mount a cutting edge
Use Grade 8 or an equivalent high-strength plow bolt with a hardened nut. TD-series dozer and grader work puts real load and vibration on the mounting hardware, and lower-grade bolts loosen or stretch over time.
Do you carry parts for older International and Hough models
Yes. We stock cutting edges for legacy International and Hough equipment alongside current Dressta and Dresser production. Send us your model number and blade dimensions to confirm fitment.
Not sure which parts you need?
Our friendly service reps will be happy to assist. Please download and fill out our blade measurement form and either fax or email it back and we’ll find you the right parts.
Download Form