Skip to content

Cart

Your cart is empty

Rippers & Ripper Teeth

Sort by

80 products

Filters

BC 101-Equipment Blades-Equipment Blades IncBC 101-Rippers Shank-Equipment Blades-Equipment Blades Inc
BC 101

Part #: BC 101

BC 101

Part #: BC 101

Universal Scarifier Shank. Two Notches Front and Back. Thickness: 1" Width: 3" Length: 17.25"
BC 104-Equipment Blades-Equipment Blades IncBC 104-Rippers Shank-Equipment Blades-Equipment Blades Inc
BC 104

Part #: BC 104

BC 104

Part #: BC 104

Universal Scarifier Shank. Two Notches Front and Back. Thickness: 1" Width: 3" Length: 20"
CAT 5B6251-Teeth & Adapters-Equipment Blades Inc-Equipment Blades IncCAT 5B6251-Teeth & Adapters-Equipment Blades Inc-Equipment Blades Inc
CAT 5B6251

Part #: CAT 5B6251

CAT 5B6251

Part #: CAT 5B6251

CAT 5B6251 - SCARIFIER SHANK 15.125" BACK SIDE NOTCH 2 THICKNESS: 1" WIDTH: 2.5" LENGTH: 15.13"
CAT 9F5124-Teeth & Adapters-Equipment Blades Inc-Equipment Blades IncCAT 9F5124-Teeth & Adapters-Equipment Blades Inc-Equipment Blades Inc
CAT 9F5124

Part #: CAT 9F5124

CAT 9F5124

Part #: CAT 9F5124

Scarifier Ripper Shank Front Notch for Motor Grader 17.25" Thickness 1" Width 3" Length 17.25"
CAT 9F5124BS-Teeth & Adapters-Equipment Blades Inc-Equipment Blades IncCAT 9F5124BS-Teeth & Adapters-Equipment Blades Inc-Equipment Blades Inc
CAT 9F5124BS

Part #: CAT 9F5124BS

CAT 9F5124BS

Part #: CAT 9F5124BS

Scarifier Shank Rear Notch Thickness: 1" Width: 3" Length: 17.25
CHA 8110-Equipment Blades-Equipment Blades IncCHA 8110-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CHA 8110

Part #: CHA 8110

CHA 8110

Part #: CHA 8110

SCARIFIER SHANK - Front Notch Thickness: 1" Width: 3" Length: 16.94"
GAN H920-23-Equipment Blades-Equipment Blades IncGAN H920-23-Equipment Blades-Equipment Blades Inc
GAN H920-23

Part #: GAN H920-23

GAN H920-23

Part #: GAN H920-23

SCARIFIER SHANK FRONT NOTCH Thickness: 0.75" Width: 2.5" Length: 15.59"
CAT 5K1459-Teeth & Adapters-Equipment Blades Inc-Equipment Blades IncCAT 5K1459-Ripper Shank-Equipment Blades Inc-Equipment Blades Inc
CAT 5K1459

Part #: CAT 5K1459

CAT 5K1459

Part #: CAT 5K1459

Wedge pin for Scarifier ripper shanks
6y5230 Motor Grader Pressure Tooth
CAT 6Y5230

Part #: CAT 6Y5230

CAT 6Y5230

Part #: CAT 6Y5230

CAT 6Y5230 - MOTOR GRADER TOOTH Caterpillar style motor grader pressure tooth. No pin necessary. THICKNESS: 1.438 " WIDTH: 1.906 " LENGTH...
CHA 9934-Equipment Blades-Equipment Blades IncCHA 9934-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CHA 9934

Part #: CHA 9934

CHA 9934

Part #: CHA 9934

RIPPER SHANK FITS 9937 TEETH Thickness: 1.77" Width: 8.55" Length: 23.51"
CAT 9J6586-Teeth & Adapters-Equipment Blades-Equipment Blades IncCAT 9J6586-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CAT 9J6586

Part #: CAT 9J6586

CAT 9J6586

Part #: CAT 9J6586

CAT CAST RIPPER SHANK R300 NOSE - FITS CAT GRADER RIPER & D4, D5 Thickness: 2.25" Width: 5.38" Length: 21.34"
T211749-Equipment Blades Inc-Equipment Blades IncT211749-Equipment Blades Inc-Equipment Blades Inc
T211749

Part #: T211749

T211749

Part #: T211749

Ripper Shank - Fits John Deere Ripper - R300 Nose  Thickness: 2.25" Width: 5.35" Length: 24.39"  
CAT 8E7300-Equipment Blades-Equipment Blades IncCAT 8E7300-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CAT 8E7300

Part #: CAT 8E7300

CAT 8E7300

Part #: CAT 8E7300

R300 REPAIR NOSE  Thickness: 2.019" Width: 3.438" Length: 5.313"
CAT 6Y0309-Equipment Blades-Equipment Blades IncCAT 6Y0309-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CAT 6Y0309

Part #: CAT 6Y0309

CAT 6Y0309

Part #: CAT 6Y0309

R300 PENETRATION RIPPER Thickness: 4.217" Width: 3.307" Length: 11.489"
CAT 138-0797-Equipment Blades-Equipment Blades Inc
CAT 138-0797

Part #: CAT 138-0797

CAT 138-0797

Part #: CAT 138-0797

This is a R350 Ripper Shank D6, 24H that is 2.938" thick, 10.456" wide, and 28.402" in length.
8E5346-Equipment Blades Inc-Equipment Blades Inc
8E5346

Part #: 8E5346

8E5346

Part #: 8E5346

This is a R450 Ripper Shank D8, D9 that is 3" thick, 13" wide, and 63.39" in length.
8E5345-Equipment Blades Inc-Equipment Blades Inc
8E5345

Part #: 8E5345

8E5345

Part #: 8E5345

This is a R450 Ripper Shank D8, D9 that is 3" thick, 13" wide, and 69.41" in length.
8E5342-Equipment Blades Inc-Equipment Blades Inc
8E5342

Part #: 8E5342

8E5342

Part #: 8E5342

This is a R450 Ripper Shank D8, D9 that is 3" thick, 13" wide, and 75.20" in length.
CAT 8E7350-Equipment Blades-Equipment Blades Inc
CAT 8E7350

Part #: CAT 8E7350

CAT 8E7350

Part #: CAT 8E7350

R350 REPAIR NOSE D5/D6/D7/24H Bolt Diameter": 0 Thickness": 2.938 Width": 4.438 Length": 6.625
CAT 6Y0352-Equipment Blades-Equipment Blades IncCAT 6Y0352-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CAT 6Y0352

Part #: CAT 6Y0352

CAT 6Y0352

Part #: CAT 6Y0352

R350 CENTERLINE RIPPER TOOTH Thickness: 5.82" Width: 4.732" Length: 14"
CAT 1380796-Equipment Blades-Equipment Blades IncCAT 1380796-Teeth & Adapters-Equipment Blades-Equipment Blades Inc
CAT 1380796

Part #: CAT 1380796

CAT 1380796

Part #: CAT 1380796

R350 RIPPER SHANK ONE PIN STANDARD PROTECTOR  Dimensions as follows: A: 3.05" B: 12.75" C: 5.38" D2.31"  
8E5347-Equipment Blades Inc-Equipment Blades Inc
8E5347

Part #: 8E5347

8E5347

Part #: 8E5347

This is a R450 Ripper Shank D8, D9 that is 3" thick, 13" wide, and 79.13" in length.
8E5339-Equipment Blades Inc-Equipment Blades Inc
8E5339

Part #: 8E5339

8E5339

Part #: 8E5339

This is a R350 Ripper Shank D8, D9 that is 3" thick, 13" wide, and 91.73" in length.
8E5340-Equipment Blades Inc-Equipment Blades Inc
8E5340

Part #: 8E5340

8E5340

Part #: 8E5340

This is a R450 Ripper Shank D8, D9 that is 3.00" thick, 13" wide, and 96.85" in length.
8E5348-Equipment Blades Inc-Equipment Blades Inc
8E5348

Part #: 8E5348

8E5348

Part #: 8E5348

This is a R450 Ripper Shank D8, D9 that is 3" thick, 13" wide, and 108.66" in length.
8E8415-Equipment Blades Inc-Equipment Blades Inc
8E8415

Part #: 8E8415

8E8415

Part #: 8E8415

This is a R500 Ripper Shank D9, D10 that is 3.54" thick, 13.98" wide, and 71.61" in length.
8E8414-Equipment Blades Inc-Equipment Blades Inc
8E8414

Part #: 8E8414

8E8414

Part #: 8E8414

This is a R500 Ripper Shank D9, D10 that is 3.54" thick, 13.98" wide, and 91.50" in length.
CAT 6J8814-Equipment Blades-Equipment Blades Inc
CAT 6J8814

Part #: CAT 6J8814

CAT 6J8814

Part #: CAT 6J8814

R450 PROTECTOR 2PIN STANDARD Bolt Diameter": 1.375 Thickness": 3 Width": 4.25 Length": 17
CAT 6J8814EXT-Equipment Blades-Equipment Blades Inc
CAT 6J8814EXT

Part #: CAT 6J8814EXT

CAT 6J8814EXT

Part #: CAT 6J8814EXT

R450 PROTECTOR 2PIN STD EXT Bolt Diameter": 1.375 Thickness": 3 Width": 4.75 Length": 23
CAT 8E1848-Equipment Blades-Equipment Blades Inc
CAT 8E1848

Part #: CAT 8E1848

CAT 8E1848

Part #: CAT 8E1848

R450 PROTECTOR 2PIN SHARP Bolt Diameter": 1.375 Thickness": 3 Width": 5 Length": 19.125
CAT 1324716-Equipment Blades-Equipment Blades IncCAT 1324716-Equipment Blades-Equipment Blades Inc
CAT 1324716

Part #: CAT 1324716

CAT 1324716

Part #: CAT 1324716

R450 PROTECTOR 2PIN STD EXT Bolt Diameter": 1.313 Thickness": 3.188 Width": 12.199 Length": 27.108
CAT 8E8418-Equipment Blades-Equipment Blades Inc
CAT 8E8418

Part #: CAT 8E8418

CAT 8E8418

Part #: CAT 8E8418

R450 Quarter Shank D8/D9  Thickness: 3.241" Width: 12.754" Length: 17.418"
CAT 9U9694-Equipment Blades-Equipment Blades Inc
CAT 9U9694

Part #: CAT 9U9694

CAT 9U9694

Part #: CAT 9U9694

R450 NOSE D8/D9 Bolt Diameter": 1.063 Thickness": 2.875 Width": 8 Length": 12.25
CAT 4T5451-Equipment Blades-Equipment Blades Inc
CAT 4T5451

Part #: CAT 4T5451

CAT 4T5451

Part #: CAT 4T5451

Contact Us For Possible Free Shipping R450 PENETRATION SHORT TOOTH Bolt Diameter": 0 Thickness": 6.833 Width": 5.577 Length": 12.875
CAT 4T5452-Equipment Blades-Equipment Blades Inc
CAT 4T5452

Part #: CAT 4T5452

CAT 4T5452

Part #: CAT 4T5452

Contact Us For Possible Free Shipping R450 PENETRATION INT TOOTH Bolt Diameter": 0 Thickness": 6.81 Width": 5.58 Length": 15.644
CAT 9W2451-Equipment Blades-Equipment Blades Inc
CAT 9W2451

Part #: CAT 9W2451

CAT 9W2451

Part #: CAT 9W2451

Contact Us For Possible Free Shipping R450 CENTERLINE SHORT TOOTH Bolt Diameter": 0 Thickness": 6.765 Width": 5.633 Length": 12.875
CAT 9W2452-Teeth & Adapters-Equipment Blades Inc-Equipment Blades IncCAT 9W2452-Teeth & Adapters-Equipment Blades Inc-Equipment Blades Inc
CAT 9W2452

Part #: CAT 9W2452

CAT 9W2452

Part #: CAT 9W2452

R450 Centerline Int Tooth
CAT 1140453-Teeth & Adapters-Equipment Blades Inc-Equipment Blades IncCAT 1140453-Teeth & Adapters-Equipment Blades Inc-Equipment Blades Inc
CAT 1140453

Part #: CAT 1140453

CAT 1140453

Part #: CAT 1140453

Contact Us For Possible Free Shipping R450 CENTERLINE LONG TOOTH Bolt Diameter": 0 Thickness": 6.77 Width": 5.629 Length": 16.65
8E8416-Equipment Blades Inc-Equipment Blades Inc
8E8416

Part #: 8E8416

8E8416

Part #: 8E8416

This is a R500 Ripper Shank D9, D10 that is 3.54" thick, 13.98" wide, and 111.18" in length.
8E8411-Equipment Blades Inc-Equipment Blades Inc
8E8411

Part #: 8E8411

8E8411

Part #: 8E8411

This is a R500 Ripper Shank D10 that is 3.54" thick, 14.96" wide, and 98.82" in length.
8E8417-Equipment Blades Inc-Equipment Blades Inc
8E8417

Part #: 8E8417

8E8417

Part #: 8E8417

This is a R500 Ripper Shank D10 that is 3.54" thick, 14.96" wide, and 117.99" in length.
1182140-Equipment Blades Inc-Equipment Blades Inc
1182140

Part #: 1182140

1182140

Part #: 1182140

This is a R500 Ripper Shank D10 that is 3.94" thick, 15.75" wide, and 98.82" in length.
1093135-Equipment Blades Inc-Equipment Blades Inc
1093135

Part #: 1093135

1093135

Part #: 1093135

This is a R500 Ripper Shank D10 that is 3.94" thick, 15.75" wide, and 118.78" in length.
1049277-Equipment Blades Inc-Equipment Blades Inc1049277-Equipment Blades Inc-Equipment Blades Inc
1049277

Part #: 1049277

1049277

Part #: 1049277

This is a R550 Ripper Shank D10 that is 4.33" thick, 17.72" wide, and 107.60" in length.
CAT 1U3644-Equipment Blades-Equipment Blades Inc
CAT 1U3644

Part #: CAT 1U3644

CAT 1U3644

Part #: CAT 1U3644

R500 PROTECTOR 1PIN STANDARD Bolt Diameter": 99.999 Thickness": 4.125 Width": 9 Length": 29
CAT 6Y8960-Equipment Blades-Equipment Blades Inc
CAT 6Y8960

Part #: CAT 6Y8960

CAT 6Y8960

Part #: CAT 6Y8960

R500 PROTECTOR SHARP 100MM Bolt Diameter": 1.5 Thickness": 4 Width": 12.188 Length": 22.062
CAT 1321015-Equipment Blades-Equipment Blades Inc
CAT 1321015

Part #: CAT 1321015

CAT 1321015

Part #: CAT 1321015

R500 PROTECTOR SHARP EXT 100MM Bolt Diameter": 1.5 Thickness": 4 Width": 19 Length": 34.25
CAT 1038114-Equipment Blades-Equipment Blades IncCAT 1038114-Equipment Blades-Equipment Blades Inc
CAT 1038114

Part #: CAT 1038114

CAT 1038114

Part #: CAT 1038114

R500 NOSE FOR 1 PIN PROTECTOR Bolt Diameter": 0 Thickness": 3.938 Width": 10.563 Length": 17.438
Rippers and ripper teeth can be used in many applications.  Rippers for motor graders, bull dozers, and excavators are common applications.  Contact one of our experts to find out which one of the many options is right for your application.

Not sure which parts you need?

Our friendly service reps will be happy to assist. Please download and fill out our blade measurement form and either fax or email it back and we’ll find you the right parts.